Anchor Electic Piston Pump is our most adaptable.
Anchor Electric Piston Pump
Blackhawk positive-displacement piston pumps feature an all-weather electric drive motor above the wellhead, connected with high-quality downhole components. The pumping action is similar to that of an oilfield pump jack.
The Anchor Electric® piston pump is powered by electricity. The control motor is located at surface grade for easy installation and maintenance. Above-well drive motor provides linear reciprocating pump action from grade through the sucker-rod assembly. The reciprocating pump removes water and product (e.g., oil, solvents, leachate) with a 1 hp motor at 50 Hz. The fluid inlet is located at the bottom of the pump intake cylinder and removes water or product to 0 submergence depth. It is perfectly suited to groundwater pump and remediation pump applications.
Key Applications
- Landfill Leachate
- Gas Well Dewatering
- Gas Condensate Pump
- Directional Wells
- Ground Water Remediation
- Oil and Gas Processing
- Chemical Processing
- DNAPL Recovery and LNAPL Recovery
- Rugged
- Above-grade mounting
- Few moving parts
- Safer, easier, less-frequent servicing
- Lower power requirements
- Adaptable to site requirements
- Affordable
- Apollo Family of Products
Features / Benefits
I&O Manual
A manual for installation, maintenance and troubleshooting of the Anchor Electric Pump.
Product Sheet
An overview of the Anchor Electric Pump.
Technical Data Sheets
Model 101 removes water and product (e.g., oil, solvents, leachate) from a two-inch (4.85 cm) diameter well casing or greater, to depths of 804 feet (245 meters) with a 1 hp motor at 50 Hz.
Model 102 removes water and product (e.g., oil, solvents, leachate) from a three-inch (7.62 cm) diameter well casing or greater, to depths of 350 feet (106 meters) with a 1 hp motor at 50 Hz.